Lift AGV SL600 Laser Guided
Lift AGV SL600 Laser Guided

Lift AGV SL600 Laser Guided

Laser Guided Lift AGV SL600 Model AMR combine automatic guidance technology and lifting mechanisms to travel autonomously on a preset path and lift materials to a specified height as needed. Its core components include agv lift vehicle body, drive unit, navigation system, control system, lifting mechanism and safety protection system.
Send Inquiry
Chat Now

Laser Guided Lift AGV SL600 Model AMR
Model:MDAMR-SL600

product-1172-359

product-1172-456

 

Laser Guided Lift AGV SL600 Model AMR is based on laser navigation: the robot will create a real-time environment map and continuously compare its position in the map; The standard repeat positioning accuracy is ± 10mm, which can be tightened to ± 5mm after adding QR code navigation to the docking point. The equipment does not require the use of magnetic strips, wires, or reflectors, and no fixed facilities need to be buried in the channel; When adjusting the layout of the production line, only the map and points in the software need to be modified, without involving ground construction. The front laser obstacle avoidance system at the front of the car continuously scans the direction of travel, and when encountering obstacles, it slows down and detours without the need for manual intervention to pass through areas with people moving. The equipment is designed for continuous operation: lithium iron phosphate batteries provide 6-8 hours of battery life, can be fully charged in 2 hours, and automatically return to the charging station when the battery level is low; The rated load is 600kg and the operating speed is 800mm/s. It can be used to directly transport cardboard boxes and fixtures on flat plates, as well as to lift shelves and material trucks for whole frame transportation. After connecting to the TZDPControl scheduling system, the location, path, and task allocation of multiple devices can be managed uniformly; The order of picking and placing, as well as the handshake signal between the conveyor line and the automatic door, are all defined by the script. When adjusting the on-site process, the script can be modified without the need to replace hardware. It has strong adaptability, which is reflected in the fact that there is no need to modify the site: narrow channels and existing shelf spacing can be used with the existing flow line. The premise is that the ground is flat and intact, without steps, steep slopes, or grooves, and not used in damp or flammable environments.

 

 

Specification

 

 

ltem

Data

Model

MDAMR-SL600

Navigation method

SLAM

Dimensions

L926*W756*H285mm

Lifting Height

60mm

Drive Type

Differential drive

Walking Direction

Forward and reverse/left and right tur/ rotate in place

Maximum Speed

1.5m/s

Rated Load

600kg

Charging MethodBattery

Lithium iron phosphate battery

Positioning accuracy

Manual/automatic charging

Safety Protection

LIDAR+Collision Bumper+Emergency Stop Button

Communication

Wireless

 

 

Products Description

 

 

1laser navigation

 

1 Laser Navigation for Flexible Industrial AMR Deployment

 

2 600kg

 

2 600kg heavy load and 50mm lifting capacity

 

3 long endurance

 

3 Automatic charging supporting 24-hour continuous operation

 

4 deployment

 

4 From laser SLAM mapping to autonomous operation

 

 

Dimension

 

structure

 

structure

 

6 structure

 

5 Laser Navigation Automatic Charging

 

 

more Specification

 

7 parameters

 

6 parameters description

 

 

Product detail

 
product-280-287
product-281-287
product-281-287
 
product-280-287
 

FAQ

 

 

01.What are the dimensions of the Laser Guided Lift AGV SL600 Model AMR? Can the existing passages and doorways pass through?

The overall dimensions are 950 × 780 × 285mm (length × width × height). When selecting a vehicle, check the width of the passage, the net width of the door opening, and the turning radius based on the body shape and safety margin to determine whether it can pass; If there are narrow openings on site, it is recommended to conduct actual measurements before determining the route.

02.Can accurate docking still be achieved when there is a deviation in the placement of shelves or material trucks?

Yes. The robot completes docking by identifying the position of the shelves through laser recognition, and the shelves do not affect picking and placing within the normal placement error range; If it is required that the height of the docking point be consistent every time, a QR code navigation can be installed to tighten the repeat positioning accuracy to ± 5mm. It is recommended that the shelves be placed according to uniform specifications to avoid long-term offset accumulation.

03.How to install a charging station? What are the requirements for power supply?

The size of the charging station is 400 × 260 × 340mm, with input of 100-240VAC, 50/60Hz, working temperature of 0-45 ℃, humidity of 10% -95%, using contact charging. It is recommended to install near the end of the commonly used work area or the side of the channel to reduce the distance of empty charging; The charging brush board only outputs electrical energy after coming into contact with the vehicle body, and is not charged when not in contact.

04.What is the operating speed? How to calculate the transportation rhythm?

The operating speed under rated load is 800mm/s. The actual pace needs to be comprehensively calculated based on the length of the one-way path, the time taken for picking up and unloading goods, and the waiting time at the entrance and intersection. It is recommended to use on-site route measurement and verification during the planning phase to avoid estimating production capacity solely based on vehicle speed.

05.Does it support manual remote control operation?

Yes. The Laser Guided Lift AGV SL600 Model AMR is equipped with a debugging network port and a remote control receiving interface. During the mapping, point calibration, and debugging stages, manual remote control can be used for driving; Some models are equipped with physical remote control sockets. The daily operation is assigned tasks by the scheduling system, and manual remote control is mainly used for deployment and exception handling.

06.Does the device need to be connected to the internet? What network conditions are required for mapping and daily scheduling?

During the mapping phase, the device can be directly connected to its own hotspot or accessed through a network port using a computer, without relying on the factory network; Daily multi machine scheduling involves connecting devices to the factory's 2.4G/5G Wi Fi or local area network, and communicating with the scheduling system through TCP (AMR protocol). Before deployment, it is recommended to confirm the wireless coverage strength of the work area to avoid disconnection at the end of the channel.

 

 

product-1159-760

product-1159-1007

product-1159-519

 

product-1159-735product-1159-741

product-1159-722

Hot Tags: Lift AGV SL600 Laser Guided, China Lift AGV SL600 Laser Guided manufacturers, suppliers, factory, distribution transport lifting agv, lifting agv for component movement in logistics centers, lifting agv for manufacturing plants, lifting agv for factories, slim lifting agv, lifting agv system