BLDC Electronic Driver Controller
BLDC Electronic Driver Controller

BLDC Electronic Driver Controller

The MDSM series servo drive adopts vector control technology, combined with PID regulation and real-time current detection, supports position, speed, and torque control modes, and provides functions such as RS485, CAN communication, Hall sensor and encoder feedback, digital I/O, and pulse direction control. The driver is equipped with fault monitoring for overcurrent, overload, overvoltage, undervoltage, and overheating, and can be debugged, monitored, and troubleshoot through a PC upper computer. It is suitable for motor drive and control of mobile robots, service robots, and industrial automation equipment. The specific interfaces, parameters, and functions shall be subject to the corresponding model configuration.
Send Inquiry
Chat Now

BLDC Servo Electronic Driver Controller

Model:MDSM25B60G-ROBOT

product-1172-359

product-1173-489

 

 

Overview

 

 

The BLDC Servo Electronic Driver Controller supports motor parameter matching, drive configuration, debugging, and operation monitoring through the accompanying Motor Control Platform 3.0 software, making it convenient for engineers to complete system settings according to actual equipment needs. The BLDC Servo Electronic Driver Controller provides RS485 and CAN communication interfaces, which can be used for communication with compatible control systems. The specific protocol support needs to be confirmed according to the model and configuration; Some models also support pulse direction control, making it easy to receive external motion control commands. By reasonably configuring motor parameters, control commands, and communication methods,BLDC Servo Electronic Driver Controller can be applied to robots, mobile devices, and industrial automation systems, helping equipment manufacturers meet different motion control and integration needs.

 

feature

 

1 vector control technology

Vector Control Technology

The BLDC Servo Electronic Driver Controller adopts vector control technology, combined with PID regulation and real-time current detection, to achieve precise control of motor forward and reverse rotation, commutation, braking, speed and position. Supports RS485 (Modbus ASCII/RTU) and CAN communication (CANopen and custom CAN protocol), suitable for motor drive and control of mobile robots, service robots, exoskeleton robots, and industrial automation equipment.

2 position speed torque modes

Position, speed, and torque control modes
The BLDC Servo Electronic Driver Controller supports position loop, speed loop, and torque loop control modes. The factory default adopts speed loop control, and the corresponding mode can be selected according to the motion control requirements of the equipment. Combining vector control technology with PID regulation to achieve flexible control of motor position, speed, and torque, suitable for mobile robots, service robots, and industrial automation equipment.

3 CAN RS485 communication

CAN and RS485 communication

The BLDC Servo Electronic Driver Controller supports RS485 and CAN communication. RS485 is compatible with Modbus ASCII and RTU protocols, and the CAN interface supports CANopen (CiA 301, CiA 402) and custom CAN protocols, making it easy to communicate and integrate with robot control systems and automation equipment. The specific communication interface and protocol configuration should be based on the corresponding model.

4 hall sensor encoder feedback

Hall sensor and encoder feedback

BLDC Servo Electronic Driver Controllers support Hall feedback and encoder feedback, can adapt to incremental encoder ABZUVW differential signals, and support TTL level adjustment and serial absolute value encoder. The specific feedback method depends on the driver model, which is convenient to meet the feedback and motion control needs of different motors.

5 IO pulse-direction control

I/O input/output and pulse direction control
The BLDC Servo Electronic Driver Controller supports digital input/output (I/O) and pulse and direction signal control, which can be used for motor enable, limit, origin and other related controls, and motion control is achieved through pulse commands. The I/O configuration and pulse interface parameters of different models vary, and the interface definition of the corresponding model needs to be confirmed when selecting.

6 fault protection functions

Monitoring of overcurrent, overvoltage, and overheating faults

BLDC Servo Electronic Driver Controller have various fault monitoring functions, which can identify motor overcurrent, overload, driver overheating, motor overheating, power overvoltage and undervoltage and other abnormalities. Relevant fault information is displayed through status indicator lights and upper computer monitoring windows to help users timely troubleshoot equipment operation abnormalities. The specific functions are subject to the corresponding model configuration.

7 PC-based setup monitoring

PC upper computer debugging and status monitoring

BLDC Servo Electronic Driver Controller support PC upper computer debugging, and can be matched with motor parameters, tested, and monitored for operation status through Motor Control Platform 3.0 software, helping users complete drive debugging and view relevant fault information. When matching motor parameters for the first time, it is necessary to ensure that the motor is in an unloaded state.

 

 

Product detail

 

 

product-1171-391

 

 

Dimension

 

 

MDSM25B60G-ROBOT

 

 

Specification

 

 

ltem

Parameters

Model

MDSM25B60G-ROBOT

Limit Power Supply Range

16~60VDC

Rated Current

25Arms±2%

Maximum Current

100Arms±1%

Maximum Overload Time

6S

Overload Recovery Time

90S

Rated insulation withstand voltage

Input and output DC 1000V leakage current to the enclosure less than 3mA.

Drive Frequency

6~16KHz±0.1KHz

Insulation resistance of the whole machine

≥1M at 40°temperature and 95%humidity

Power Control Method

Vector control

Mean time between failures(MTBF)

≥5000 hours

FAQ

 

 

01.What devices are BLDC Servo Electronic Driver Controller suitable for?

The BLDC Servo Electronic Driver Controller is suitable for mobile robots, service robots, wearable exoskeleton robots, and other industrial automation equipment, and can be used to control the forward and reverse rotation, commutation, and braking of motors. When selecting, the appropriate driver model can be chosen based on the rated current of the motor, the supply voltage, and the actual operating requirements of the equipment.

02.What control methods does the BLDC Servo Electronic Driver Controller support?

The BLDC Servo Electronic Driver Controller supports motor motion control and can achieve forward and reverse rotation, commutation, and braking. Some models support pulse and direction signal input and can receive motion commands from external controllers. The specific control method needs to be selected based on the driver model and the control system of the equipment.

03.How to configure and debug BLDC Servo Electronic Driver Controllers?

The BLDC Servo Electronic Driver Controller can be configured and debugged through the accompanying Motor Control Platform 3.0 software. Users can complete driver settings based on motor parameters and monitor the operating status through software. Before debugging, it is necessary to confirm that the power supply, motor, and feedback circuit are connected correctly, and then conduct a trial run to ensure stable motor control of the equipment.

04.Does the BLDC Servo Electronic Driver Controller support RS485 and CAN communication?

Some models of the MDSM series are equipped with RS485 and CAN communication interfaces, which can be used for data communication between the driver and external control systems. The interface configuration of different models may vary, and it is recommended to confirm the compatible model based on the communication interface and system integration requirements of the existing controller before procurement.

05.What are the fault protection functions of MDSM series servo drives?

The MDSM series servo drive has multiple operation fault monitoring functions, which can detect issues such as power undervoltage, overvoltage, motor overcurrent, overload, driver overheating, motor overheating, abnormal position, and feedback or communication faults. By monitoring the fault status, users can more targetedly troubleshoot equipment abnormalities and improve the maintenance efficiency of the motor control system.

06.How to troubleshoot BLDC Servo Electronic Driver Controller when they malfunction?

When the BLDC Servo Electronic Driver Controller experiences abnormal operation, you can first check the fault status through the supporting software, and then check whether the power supply voltage, motor wiring, encoder or Hall feedback connection, and communication line are normal. For issues such as overcurrent, overload, or overheating, the motor load and equipment operating conditions should also be checked. Restarting after troubleshooting can help ensure the normal operation of the drive and motor.

product-1159-760

product-1159-1007

product-1159-519

product-1159-735

product-1159-741

 

product-1159-722

Hot Tags: BLDC Electronic Driver Controller, China BLDC Electronic Driver Controller manufacturers, suppliers, factory, servo motor driver for generators, servo motor driver for ce conformit europ enne certification, servo motor driver for textile machinery, servo motor driver for gb guobiao chinese national standards standards, servo motor driver for safety features, servo motor driver for smooth operation