Permanent Magnet Synchronous Motor Driver
Permanent Magnet Synchronous Motor Driver

Permanent Magnet Synchronous Motor Driver

The permanent magnet synchronous motor driver utilizes cutting-edge vector control technology to deliver industry-leading efficiency, significantly enhancing system performance while extending vehicle range. Its precision-engineered control algorithms ensure exceptionally smooth motor operation with minimal torque ripple, effectively eliminating vibration and noise. Built to automotive-grade standards with premium components, the controller achieves unmatched reliability in demanding electric vehicle applications.
Send Inquiry
Chat Now

Permanent Magnet Synchronous Motor Driver

Model:PME072080AM5N

product-1172-359

high power motor driver controller

 

Permanent Magnet Synchronous Motor Driver operates on a 48V platform (36~72V input), driving a 3.0kW AC permanent magnet synchronous motor with a rated phase current of 80Arms and a peak phase current of up to 220Arms. It is suitable for high-power electric motorcycles and micro electric vehicles.

Permanent Magnet Synchronous Motor Driver Vector control combined with MTPA and weak magnetic control maintains maximum torque output in the full speed range, with a controller efficiency of not less than 98%, extending the vehicle's range. Sine wave drive reduces torque fluctuations and lowers motor vibration and noise.

Multi level protection mechanism: Permanent Magnet Synchronous Motor Driver has over temperature, over voltage, under voltage, over current, overload, and runaway protection. The temperature is processed by two independent channels - the controller limits the current at 80 ℃, shuts off at 100 ℃, and recovers at 85 ℃; Motor channel 130/150/120 ℃. High and low level braking, reversing, and motor temperature detection are connected through flexible peripheral interfaces; CAN completes the integration of the entire vehicle, and the energy feedback function recovers kinetic energy during deceleration.

The Permanent Magnet Synchronous Motor Driver IP65 casing supports operation at -20~55 ℃ (derating above 55 ℃) and storage at -40~85 ℃. The whole machine is designed and tested according to GB/T 18488.1-2015 and GB/T 18488.2-2015, and the type inspection is based on GB/T 21418-2008.

 

feature

 

1 permanent magnet synchronous

 

1 Permanent magnet synchronous motor controller

 

2 vector control

 

2 Vector Control FOC Technology

 

4 CAN bus control

 

3 communication

 

5 IP65 protection level

 

4 protection level

 

3 thermal protection

 

5 Dual channel overheat protection

 

applications

 

6 Application

 

 

Dimension

 

 

2

 

Specification

 

 

ltem

Data

Model

PME072080AM5N
Voltage input range 36~72V(nominal voltage 48V)
Maximum efficiency of controller ≥98%
Rated value of phase current 80Arms
Maximum phase current 220Arms
Communication method CAN
Working Environment

Temperature: -20~55℃

Humidity: 10~90%

Storage environment Temperature -40℃~85℃
Protection grade IP65
Weight 1000 g
Overall dimensions 193.5×125.8×73 Unit:mm

 

FAQ

 

 

01.What battery packs can be equipped with an input range of 36~72V

This Permanent Magnet Synchronous Motor Driver has a nominal voltage of 48V and an input range of 36-72V, and can be matched with battery packs of common voltage platforms such as 36V, 48V, and 60V. Both lead-acid and lithium batteries are available. The optional hard boundary is that the fully charged voltage of the battery does not exceed 72V - the 48V lithium battery pack is fully charged at about 54.6V, and the 60V pack is about 70V, both within the range; The 72V group will approach or exceed the upper limit when fully charged, and it is not recommended to use it. At the same time, it is necessary to confirm that the continuous discharge capacity of the battery meets the rated phase current requirement of the controller 80Arms.

02.What car models are suitable for a 3.0kW controller? How to configure the motor?

The manual is positioned for high-power electric motorcycles and micro electric vehicles. When selecting, match the motor with a rated power of ≤ 3.0kW, rated phase current of ≤ 80Arms, and peak value not exceeding 220Arms, and verify the compatibility of the motor's back electromotive force with the 48V platform. Suggest reserving 10% to 20% power margin: If the margin is too small, it will frequently trigger current limiting and derating during full load climbing, while if the margin is too large, it will increase costs and volume.

03.What do the rated 80Arms and peak 220Arms represent respectively?

Permanent Magnet Synchronous Motor Driver 80Arms is the rated value of phase current during continuous operation, corresponding to the controller's ability to output stable output for a long time, which determines the performance of flat cruising and conventional load; 220Arms is a short-term peak capability used for instantaneous high torque conditions such as starting, accelerating, and climbing, and cannot be maintained for a long time. When designing the power of the entire vehicle, it is a relatively safe approach to select models based on continuous values and verify extreme working conditions based on peak values.

04.What is the difference between high and low level braking? How should I connect?

These are two types of brake signal triggering logic: high-level braking is triggered when the brake switch is connected to the positive pole of the power supply, and low-level braking is triggered when the signal is pulled down to the ground, corresponding to different types of brake switches from different vehicle manufacturers. When wiring, it is necessary to first confirm whether the vehicle brake switch is of the "positive" or "ground" type, and then connect it to the brake signal terminal of the controller accordingly. Connecting it in the opposite direction will cause the brake signal to remain on or fail. Please refer to the wiring table of this model for specific terminal numbers.

05.What faults are targeted by the six protections?

Over temperature protection monitoring controller and motor temperature, limiting current or shutting down when exceeded; Overvoltage protection prevents damage to power devices caused by excessive battery voltage (such as feedback or charging abnormalities); Undervoltage protection prevents battery over discharge and ensures stable control voltage; Overcurrent protection should deal with instantaneous high currents such as phase line short circuits or locked rotor; Overload protection is designed for long-term overload operation; The speed protection will cut off the output when the speed is out of control. The thresholds are set by the manufacturer and it is not recommended to adjust them on your own.

06.How to choose between 48V platform and 72V platform?

The higher the voltage platform, the smaller the current, the lower the line loss and heat generation under the same power, making it more suitable for high-power and long-distance working conditions; The lower the platform, the looser the requirements for battery string count and insulation, and the more cost and volume friendly it is. 3.0kW level models (small and medium-sized electric motorcycles, micro cars) usually use a 48V platform, which is sufficient; If higher power or vehicle speed is required, a high-voltage model of 72V or higher should be selected. When selecting, use the rated voltage of the motor as the reference, and then check whether the input range of the controller covers the full charge voltage of the battery.
 

Certification

 

 

product-1172-525

 

 

Office

 

 

product-1172-326

 

 

Payment & Delivery

 

 

20250617143447

 

FAQ

 

 

product-1172-531

 

Hot Tags: permanent magnet synchronous motor driver, China permanent magnet synchronous motor driver manufacturers, suppliers, factory