Motor Controller Ac Driver


This series of Motor Controller Ac Driver introduces magnetic field oriented vector control into the field of compact electric drives. The product is aimed at high-power electric motorcycles and micro electric vehicles, relying on MTPA (maximum torque to current ratio) and weak magnetic control to achieve maximum torque output, improve controller efficiency, and extend range.
Smooth control and minimal torque fluctuations can effectively reduce motor vibration and noise; The energy feedback function recovers kinetic energy during deceleration. The maximum efficiency of the controller can reach 98%.
The controller and motor adopt dual independent temperature monitoring: when the temperature rises, the current is first limited, and then the output is turned off. After the temperature drops, it automatically recovers. The metal casing has an IP65 protection level and can handle dust, rainwater, and splashes in daily working conditions.
CAN communication control integrates the controller into the vehicle network, with peripheral interfaces covering high and low level braking, reversing, cruise control, and motor temperature detection. The whole machine is developed and validated according to GB/T 18488.1-2015 and GB/T 18488.2-2015.
feature

Permanent magnet synchronous motor controller
The permanent magnet synchronous motor controller adopts magnetic field oriented vector control technology, supports MTPA maximum torque current ratio and weak magnetic control, achieves maximum torque output, and the controller efficiency can reach up to 98%. It has energy feedback function during deceleration, effectively extending the vehicle's range. The product supports CAN communication control, can be easily connected to the vehicle network, and is equipped with dual channel temperature protection for the controller and motor - a three-stage strategy of current limiting, shutdown, and automatic recovery to ensure safe operation. The metal casing has an IP65 protection level (according to the specifications of each model), with a wide operating temperature range of -20 ℃~55 ℃, and is widely used in compact electric vehicles such as electric motorcycles and micro electric vehicles.

Vector Control (FOC) Technology
Vector control (FOC) technology: Clarke/Park transformation+current loop+SVPWM, decoupling torque and flux, combined with MTPA and weak magnetic control, with low torque ripple and high efficiency, supporting Hall/encoder closed-loop feedback.

CAN communication control
This series of motor controllers comes standard with a CAN communication interface, and speed control commands can be issued through the CAN bus. The integration of the controller with the vehicle network is simple and efficient. In addition to bus control, vehicle functions such as braking and reversing are processed by discrete signal inputs, each performing its own duties with clear logic; Some models also support multiple speed control command methods such as external potentiometers, external voltage, PWM, and pulse signals, adapting to different vehicle control architectures. Compared to traditional multi-channel independent wiring, the CAN based control scheme reduces wiring harness connections, simplifies system structure, and makes motor control easier to integrate into the vehicle's electronic system.

IP65 protection level
IP65 protection for motor controller housing: IP6x dust tight isolation, IPx5 anti spray in all directions, suitable for dust and rainwater conditions without protective cover installation; -20~55 ℃ wide temperature operation, reliable operation throughout the year.

Dual channel overheat protection
Dual channel overheat protection for motor controller: The power module and motor winding are independently monitored, with a three-stage strategy of current limiting, shutdown, and automatic recovery. The hysteresis design prevents critical and repeated start stop, ensuring safety and reliability under high temperature conditions.

Application scenarios of motor controllers
A control platform that adapts to various vehicle forms. The application of this series of Motor Controller Ac Driver covers seven major scenarios: storage and logistics equipment such as forklifts and pallet trucks, high-altitude work platforms such as articulated work vehicles, urban travel tools such as micro passenger cars and electric motorcycles, as well as specialized vehicles such as golf sightseeing vehicles and unmanned delivery vehicles. Whether it's warehouse floors, loading and unloading platforms, city streets, or park roads, the same control core can provide smooth and precise power output. The applicable scope of different models varies. When selecting, please refer to the corresponding specification book based on the specific vehicle model and working conditions to match the most suitable driving scheme for your vehicle.
Specification
|
ltem |
Data |
| Voltage | 48V 60V 72V |
| Power | 0.8KW 1KW 1.2KW 1.5KW |
| Maximum efficiency of controller | ≥97% |
| Communication method | CAN |
| Working Environment | temperature -20℃~55℃; humidity 10~90% |
| Storage environment | temperature -40℃~85℃ |
| Protection grade | IP65 |
| Weight | 800 g |
| Overall dimensions | 212×120×70 Unit:mm |
FAQ
01.What is a permanent magnet synchronous motor controller? Where is it mainly used?
02.What motors do these controllers support?
03.How does the controller communicate with the entire vehicle? Does it support CAN?
04.What is the efficiency of the controller?
05.How does overheat protection work?
06.What are the protection level and operating temperature range?
Certification

Office

Payment & Delivery

FAQ

Hot Tags: motor controller ac driver, China motor controller ac driver manufacturers, suppliers, factory


















