LiftMaster Laser AGV
LiftMaster Laser AGV

LiftMaster Laser AGV

Laser Guidance Material Handling AMR combine automatic guidance technology and lifting mechanisms to travel autonomously on a preset path and lift materials to a specified height as needed. Its core components include agv lift vehicle body, drive unit, navigation system, control system, lifting mechanism and safety protection system.
Send Inquiry
Chat Now

Laser Guidance Material Handling AMR
Model:MDAMR-SL600

product-1172-359

product-1172-456

 

Laser Guidance Material Handling AMR Advantages:
High precision operation: Laser Guidance Material Handling AMR using laser navigation and visual fusion, with a repeat positioning accuracy of ± 10mm, supporting in place rotation, and operating at a speed of 800mm/s under rated load, suitable for precision manufacturing and electronics industries.
Light deployment and minimal modifications: No need to lay magnetic strips, wires, or install reflective panels in the channel; When adjusting the layout of the production line, only the map and points need to be updated, without involving ground construction.
Flexible Load Capacity: With a rated load capacity of 600kg and a lifting stroke of 50mm, it can lift shelves, transport material trucks as a whole, and also carry cardboard boxes, turnover boxes, and fixtures on a flat plate.
Complete safety protection: The front laser obstacle avoidance, mechanical anti-collision strip, emergency stop on both sides of the vehicle, and sound and light alarm form a three-layer protection, supporting human-machine mixed operation.
Strong continuous operation ability: The lithium iron phosphate battery has a range of 6-8 hours and can be fully charged in 2 hours. It automatically returns to the charging station when the battery is low and can support 24-hour continuous operation.
Energy saving and environmental protection: adopting efficient motors and energy recovery systems to reduce energy consumption, in line with the concept of green manufacturing.
Modular design: The core components are modularized for quick replacement and maintenance, reducing downtime.

 

 

Specification

 

 

ltem

Data

Model

MDAMR-SL600

Navigation method

SLAM

Dimensions

L926*W756*H285mm

Lifting Height

60mm

Drive Type

Differential drive

Walking Direction

Forward and reverse/left and right tur/ rotate in place

Maximum Speed

1.5m/s

Rated Load

600kg

Charging MethodBattery

Lithium iron phosphate battery

Positioning accuracy

Manual/automatic charging

Safety Protection

LIDAR+Collision Bumper+Emergency Stop Button

Communication

Wireless

 

 

Products Description

 

 

1laser navigation

 

1 Laser Navigation for Flexible Industrial AMR Deployment

 

2 600kg

 

2 600kg heavy load and 50mm lifting capacity

 

3 long endurance

 

3 Automatic charging supporting 24-hour continuous operation

 

4 deployment

 

4 From laser SLAM mapping to autonomous operation

 

 

Dimension

 

structure

 

structure

 

6 structure

 

5 Laser Navigation Automatic Charging

 

 

more Specification

 

7 parameters

 

6 parameters description

 

 

Product detail

 
product-280-287
product-281-287
product-281-287
 
product-280-287
 

FAQ

 

 

01.How to choose the three load levels of SL300, SL600, and SL1000?

Select based on the maximum load per trip and leave some margin: The SL300 is rated at 300kg, with a body size of 835 × 590 × 260mm, suitable for narrow channels and light high-frequency loads; The SL600 is rated at 600kg and has a body size of 950 × 780 × 285mm, making it a universal model; The SL1000 has a load capacity of 1000kg and the same body as the SL600, making it suitable for scenarios with heavy loads but unchanged channels. If a higher lifting stroke is required, the SL1000-H (lifting 80mm, body 916 × 756 × 443mm, does not support in place rotation) can be selected.

02.Under what circumstances is it worth getting on an AMR instead of continuing to use manual labor or forklifts?

When the handling itself occupies a large amount of working hours, the shift is extended to more than two shifts, or when the passage is mixed with people and vehicles, and the collision risk is high, the marginal value of the equipment is most obvious. The advantages of AGV are that it is not affected by shifts and fatigue, tasks can be traced, and the parking position is fixed; If the on-site handling volume is small and the route is frequently changed, the investment and recycling will be slow. It is recommended to pilot a fixed route first.

03.Where can I check the battery level? How to determine if it's enough to run a shift?

The current battery level and status of the Laser Guidance Material Handling AMR can be viewed on the upper computer or scheduling interface. The rated endurance is 6-8 hours, and the actual duration is affected by load, slope, and parking frequency; It is recommended to reserve surplus according to the duration of each shift and arrange charging points at the end of the work area to replenish power during breaks such as shift changes and lunch breaks.

04.Can multiple vehicles share the same map?

Yes. The built map will be imported into the scheduling project, and adding multiple devices within the same project can share one map and the same set of points and routes; The launch of the new Laser Guidance Material Handling AMR does not require repeated on-site scanning, only communication configuration and script selection need to be completed, and then the parking positions need to be confirmed one by one according to the workstation numbers.

05.If problems are found during operation, can they be manually taken over?

Yes. By expanding the vehicle properties on the scheduling interface, remote operations such as power on/off, lifting, and obstacle avoidance can be performed; The Laser Guidance Material Handling AMR can also be stopped immediately on site by pressing the emergency stop button. It is recommended to manually take over the task after the vehicle has come to a complete stop and personnel have avoided the gap between the lifting platform and the shelves. Once the disposal is completed, the task can be resumed.

06.What are the main factors to consider during project acceptance?

Suggest on-site verification item by item: consistency of stopping at each point, deceleration and shutdown when obstacles occur, whether emergency stop triggering and resetting are normal, whether low battery automatic recharge is successful in one attempt, whether the closed-loop from task issuance to completion is complete, and whether the map covers all work areas. Through these measures, the stability of daily operation is basically guaranteed.

 

 

product-1159-760

product-1159-1007

product-1159-519

 

product-1159-735product-1159-741

product-1159-722

Hot Tags: LiftMaster Laser AGV, China LiftMaster Laser AGV manufacturers, suppliers, factory, lifting agv for logistics centers, lifting agv for machinery movement in logistics centers, long lasting lifting agv, lifting agv for equipment movement in logistics centers, distribution transport lifting agv, lifting agv for distribution handling in logistics centers