AGV Lift Equipment
AGV Lift Equipment

AGV Lift Equipment

The AGV Automatic Guided Vehicle with Lifter is an intelligent handling robot used for internal logistics automation in factories. It can dive into the bottom of the adapted material vehicle and achieve automatic lifting, lowering, and transportation of the material vehicle through the lifting mechanism. The rated lifting load of this model is 1000kg, with a lifting stroke of 50mm. It supports bidirectional driving and combines magnetic navigation, RFID positioning recognition, and obstacle avoidance safety devices to achieve material handling and production line distribution on preset paths. It is suitable for automated material transfer between factory workshops, warehousing logistics, and production workstations, helping enterprises reduce manual handling and improve logistics operation efficiency.
Send Inquiry
Chat Now

AGV Automatic Guided Vehicle with Lifter
Model:MDAGV-DM1000

product-1172-359

 

1 MD banner

 

The AGV Automatic Guided Vehicle with Lifter with Lifter works in coordination with sensor detection, servo drive, and control system to achieve vehicle motion control, navigation path detection, and lifting operation, suitable for material transfer requirements in automated production environments. Its controller adopts ARM core architecture, equipped with multiple digital and analog I/O interfaces, RS232 serial port, CAN bus, and TCP/IP Ethernet interface, which can be used to connect motor drivers, card readers, and human-computer interaction devices, providing support for vehicle control and related equipment communication. By combining magnetic navigation and RFID recognition technology, this AGV can detect deviations in the driving path and confirm the physical position of the vehicle, and cooperate with the lifting mechanism to automatically dock and transport the adapted material vehicle. For enterprises that need to connect different production workstations and shorten material transfer processes, system configuration can be carried out based on on-site navigation layout, equipment interfaces, and material truck structure to promote the upgrading of internal logistics in the factory towards automation and improve the standardization and operational efficiency of material distribution.

 

 

features

 

1 magnetic navigation

 

1 magnetic navigation heavy duty AGV

 

2 1000kg lifting function

 

2 1000kg lifting AGV

 

3 5mm positioning

 

3 5mm repeatability positioning accuracy

 

4 details

 

structure

 

 

5 structure

 

Specification

 

6 dimension

Name

Parameter

Weight

≤250kg

Maximum load

1000kg

Body size

1100x900x380 mm (±5mm)

Rated speed

0.6m/s

Suspension system pressure

780N

Rated driving force

500N

Friction coefficient

≥0.6

Lifting distance

50mm

Jacking speed

8mm/s

Jacking load

1000kg

Jacking structure

4 screw H type

Battery capacity

48V 50Ah

Maximum charging speed

1C

Extension of brush block

150mm

Contact engineers for details

 

FAQ

 

 

01.What is the body size of a AGV Automatic Guided Vehicle with Lifter?

The body size of this AGV Automatic Guided Vehicle with Lifter is approximately 1100 × 900 × 380 mm, with a dimensional tolerance of ± 5 mm. When planning and deploying, it is recommended to evaluate the vehicle based on the body size, the bottom space of the material vehicle, the width of the aisle, and the docking position of the lifting mechanism to ensure that the vehicle can smoothly enter under the material vehicle and complete the lifting operation.

02.What is the driving speed and driving force of this AGV Automatic Guided Vehicle with Lifter?

According to the product manual, the rated driving speed of MDAGV-DM1000 is 0.6 m/s and the rated driving force is 500 N. The actual operating effect will also be affected by factors such as ground conditions, load configuration, path layout, and on-site operating conditions. When selecting, it should be confirmed based on specific handling tasks.

03.What are the requirements for the operating ground of a AGV Automatic Guided Vehicle with Lifter?

This AGV Automatic Guided Vehicle with Lifter is suitable for operation on clean, dry, and flat ground. The manual requires a ground friction coefficient of not less than 0.6, a ground bearing capacity of 3 tons per square meter, a compressive strength of not less than 25 MPa, and limits on ground undulations and trench width. Checking ground conditions before deployment can help reduce the impact on vehicle movement and jacking operations.

04.What battery and charging configuration does AGV Automatic Guided Vehicle with Lifter use?

This AGV Automatic Guided Vehicle with Lifter is equipped with a 48V 50Ah battery, and the maximum charging rate indicated in the manual is 1C. The online charging configuration is also listed. The specific charging method, charging location, and on-site supporting requirements should be confirmed based on the actual equipment configuration and installation plan.

05.What control and communication interfaces does this AGV support?

The AGV Automatic Guided Vehicle with Lifter controller adopts ARM core architecture, equipped with multiple digital and analog I/O interfaces, CAN bus, 3 standard RS232 interfaces, and 1 TCP/IP Ethernet interface, and has expansion interfaces. The specific devices and communication methods that can be connected need to be confirmed based on the interface purpose, control scheme, and project configuration. It cannot be determined solely based on interface configuration that it can directly interface with any WMS or other management system.

06.How often does the lifting mechanism of the AGV Automatic Guided Vehicle with Lifter need to be inspected or lubricated?

It is recommended to regularly lubricate the screw and gear meshing parts in the lifting component according to the frequency of use, with a reference period of 1-3 months. If the vehicle operates frequently or the on-site working conditions are special, inspection and maintenance should be arranged based on the actual usage situation, and the operation status of the lifting mechanism should be confirmed to be normal.

product-1159-760

product-1159-1007

product-1159-519

product-1159-735

 

product-1159-741

 

product-1159-722

Hot Tags: AGV Lift Equipment, China AGV Lift Equipment manufacturers, suppliers, factory, lifting agv for pallet movement in logistics centers, factory lifting agv, manufacturing movement lifting agv, lifting agv for equipment movement in logistics centers, lifting agv for distribution centers, industrial lifting agv