Advanced Lift AGV
Advanced Lift AGV

Advanced Lift AGV

Laser Navigation Jacking Up AGV AMR combine automatic guidance technology and lifting mechanisms to travel autonomously on a preset path and lift materials to a specified height as needed. Its core components include agv lift vehicle body, drive unit, navigation system, control system, lifting mechanism and safety protection system.
Send Inquiry
Chat Now

Laser Navigation Jacking Up AGV AMR
Model:MDAMR-SL600

product-1172-359

product-1172-456

 

The Laser Navigation Jacking Up AGV AMR faces the transfer of finished materials in the workshop and warehouse, with a body size of 950 × 780 × 285mm. It can operate in narrow passages and supports in-situ rotation to adjust its posture. The Laser Navigation Jacking Up AGV AMR continuously scans the environment and updates the map in real time through laser navigation, corrects its own position according to the map, and has a repeat positioning accuracy of ± 10mm when parked. During driving, the front laser obstacle avoidance is responsible for detecting obstacles and slowing down to avoid detours. The travel path can be adjusted according to the on-site situation, and there is no need to lay magnetic strips or install reflective plates in the channel. The mapping is completed in the browser, and by driving around the site remotely, a map can be generated. After saving and exporting, it can be imported into the scheduling project. When adjusting the layout of the production line, only the map and points need to be updated, without involving ground construction. The bearing surface of the lifting platform is 950 × 780mm, with a rated load of 600kg and a lifting stroke of 50mm. It can lift the shelves, material trucks, and goods off the ground and transport them as a whole. Laser Navigation Jacking Up AGV AMR can be taken and placed in place in one go without the need to empty the container halfway; When transported by flatbed, cardboard boxes, turnover boxes, and fixtures can be directly loaded onto the vehicle. The operating speed of the vehicle under rated load is 800mm/s, supporting three types of tasks: single point delivery, multi-point unloading, and multi pickup point touring. In terms of safety, a three-layer protection system consisting of front laser obstacle avoidance, mechanical anti-collision strips, emergency stops on both sides of the vehicle, and sound and light alarms ensures stable operation even when personnel and equipment share the same channel.

 

 

Specification

 

 

ltem

Data

Model

MDAMR-SL600

Navigation method

SLAM

Dimensions

L926*W756*H285mm

Lifting Height

60mm

Drive Type

Differential drive

Walking Direction

Forward and reverse/left and right tur/ rotate in place

Maximum Speed

1.5m/s

Rated Load

600kg

Charging MethodBattery

Lithium iron phosphate battery

Positioning accuracy

Manual/automatic charging

Safety Protection

LIDAR+Collision Bumper+Emergency Stop Button

Communication

Wireless

 

 

Products Description

 

 

1laser navigation

 

1 Laser Navigation for Flexible Industrial AMR Deployment

 

2 600kg

 

2 600kg heavy load and 50mm lifting capacity

 

3 long endurance

 

3 Automatic charging supporting 24-hour continuous operation

 

4 deployment

 

4 From laser SLAM mapping to autonomous operation

 

 

Dimension

 

structure

 

structure

 

6 structure

 

5 Laser Navigation Automatic Charging

 

 

more Specification

 

7 parameters

 

6 parameters description

 

 

Product detail

 
product-280-287
product-281-287
product-281-287
 
product-280-287
 

FAQ

 

 

01.How is automatic charging completed? Do we need manual alignment?

No manual intervention is required. After receiving the automatic charging task, the Laser Navigation Jacking Up AGV AMR will drive to the charging point on its own, and the charging brush board on the vehicle will come into contact with the charging pile; The charging station only starts charging after detecting the vehicle's voltage; If the brush board does not detect voltage, it will not output electrical energy. Throughout the entire process, personnel only need to ensure that the charging point position is fixed and that the brush plate and electrodes are kept clean.

02.What should be done on-site to add a pickup point or workstation?

First, use remote control to drive the Laser Navigation Jacking Up AGV AMR to the target location, record the x and y coordinates of the point, and then add a new point or station to the dispatch system and fill in the coordinates; Afterwards, set the reference origin of the point and route. The entire process does not require any modifications to the vehicle itself, nor does it require rebuilding the blueprint.

03.Can the route only take a straight line? How to handle turning?

Not limited to straight lines. The scheduling system supports both straight and curved paths, and curves can be laid at turns according to the direction of the on-site channel; The stations and routes are generated through the coordinate calibration method mentioned above. When changing the route, only the path is adjusted, and there is no need to modify the on-site ground. The Laser Navigation Jacking Up AGV AMR itself supports left and right turning and stationary rotation, and the posture can be adjusted at narrow openings.

04.How to determine the safe distance when people and cars share the same passage?

The Laser Navigation Jacking Up AGV AMR supports laser obstacle avoidance and mechanical collision avoidance, but on-site management still needs to leave a buffer: it is recommended to draw a dedicated driving zone for the equipment according to the channel width, traffic density, and operating speed; Personnel should not suddenly cross or obstruct the front of the vehicle while driving. After the vehicle is started, it will enter the working state from standby at any time according to the scheduled task, so a safe distance should be maintained in the work area to avoid prolonged stay.

05.Where is the map data saved? Will I lose it if I change my computer or reinstall the system?

After exporting, the map will be saved in the local controller directory (AMRControl ui's map folder) and belongs to file level data. It is recommended to archive and backup the map file together with the scheduling project after the completion of the mapping. When replacing the computer or reinstalling the scheduling software, it can be directly imported for recovery without the need to rescan the site.

06.What should be done on-site if the vehicle is stuck or needs to be temporarily moved?

When the Laser Navigation Jacking Up AGV AMR gets stuck in potholes or foreign objects, the chassis can be pushed to help get out of the trap. Do not forcefully push or pull the body or forcefully pull the wheels to avoid causing abnormalities in the walking mechanism. If it is necessary to move a long distance, the handling equipment should be used and the vehicle should be kept upright. After the movement is completed, the positioning should be reconfirmed before resuming the task.

 

 

product-1159-760

product-1159-1007

product-1159-519

 

product-1159-735product-1159-741

product-1159-722

Hot Tags: Advanced Lift AGV, China Advanced Lift AGV manufacturers, suppliers, factory, lifting agv, lifting agv for load movement in logistics centers, self navigating lifting agv, lifting agv system, lifting agv for part movement in logistics centers, lifting agv for goods movement in logistics centers