How to correct the position of QR code navigation AGV

Oct 17, 2024 Leave a message

‌The QR code navigation AGV trolley performs position correction through the following steps‌:‌

‌Install QR code camera‌: Install a set of QR code cameras at the front and rear of the AGV trolley. These cameras need to be installed on the central axis of the AGV to ensure the accuracy of the position data.

‌Read position data‌: Read the position data through the first QR code camera and the second QR code camera respectively. These data are based on the same coordinate system, and the position data returned by the camera include (Front_x, Front_y) and (Back_x, Back_y).

‌Calculate deviation and adjust angle‌: Calculate the numerical difference ΔY of the position coordinates read by the two sets of cameras in the direction of the AGV body, and adjust the rotation speed of the AGV so that the difference ΔY is zero. Then, according to the data read from the first QR code camera, calculate the steering wheel angle Th of the AGV, and adjust all steering wheels to this angle.

‌Slant adjustment‌: According to the calculated angle, send the speed to make the vehicle slant a specific distance to the expected position. The tilt distance and speed are calculated by a formula to ensure that the vehicle moves to the expected position.